Trunk transfer between different phone systems

Hi,

Looking to setup a trunk transfer between a Samsung 400 and 500 where the 400 phone will have a truck transfer button on a phone attached to the 400 to connect to the 500 phone system. This will hopefully be able to transfer an outside or intercom call to phones on the 500. If it's needed a second trunk transfer button can be configured on the

400 attached phone to transfer intercom calls the 500.

Thanks in advance,

tmt

Reply to
Thundercleets
Loading thread data ...

But what method are you connecting the two systems together? E&M? Single line to trunk? OPX? Centrex?

Take care, Rich

God bless the USA

Reply to
Rich Piehl

Hi Rich,

Thanks for the reply. The two systems will be talking with a single line to trunk.

Regards, TMT

Reply to
Thundercleets

Set the ringing of the trunk on the 500 to route to the desired station and program a DSS key for the DN of the single line port on the 400 phones.

Take care, Rich

God bless the USA

Reply to
Rich Piehl

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.