I am thinking about adding a PIR type motion detector on my screen porch. The detector will be about 20 feet away from the metal screening. I do not want to pick up motion of possible deer outside or heating of the screens. Has anyone had experience with this environment?
PaulF
It will.
Most PIR's can be adjusted (their range reduced) so that they won't "see" further than you want. For certain types of applications you may also wish to mask the lens. To do this, open the detector and place white electrical tape on the part of the lens corresponding to the area you don't want it to "see". For outdoor applications where it's not directly exposed to weather (won't get wet), I'd use a "quad" type sensor or go with a unit like the Paradox DG-75.
Good luck!!!
Uh.. Frank, are you referring to the DG 85 outdoor motion as opposed to the indoor DG 75 pet immune device ?
RHC
For outdoor applications where it's not directly exposed to weather (won't get wet), I'd use a "quad" type sensor or go with a unit like the Paradox DG-75.
Good luck!!!
In a "sheltered environment" such as the OP indicates this is, the DG-75 would do just fine.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required