Hi is ther anyone out there who has a copy of the installers manual for the ADE Optima campact security alarm system, I need to alter the entry /exit time at our local Scout group and they don't have the manual, any help would be appreciated thanks Andy
press "PROG" followed by 4 digit engineers code (Day & Attack indicators light up)
for EXIT timer press "1" (zone lights 1 & 2 light up) then press buttons for desired number of seconds (divided by 10) 01 = 10 secs, 02=20 secs etc.
for ENTRY timer press "2" (zone lights 1 & 2 light up) then press buttons for desired number of seconds (divided by 10) 01 = 10 secs, 02=20 secs etc.
When finished keep pressing "RESET" until system goes back to day mode.
Check new settings but dont forget that any open zones override the timer on EXIT - (The exit timer only counts whilst all zones are clear - so if a zone is open it will never set) Which is why when setting you MUST always listen for system to set before leaving.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.