BCM Tech Help Needed!

We just purchased a Nortel BCM 3.6 system and are currently installing it. We are in need of a tech to assist us with a few programming questions. It would be several hours and could be done remotely on the weekend if the tech would like. Please contact me via email at snipped-for-privacy@mediaimages.com or by phone at (614)

410-3000 ext. 104. Or if you just so happen to be in or near Columbus, Ohio it could be done on site.
Reply to
Adam Grover
Loading thread data ...

call tele-data communications at 812-853-2100 ask for tom drew at ext

113.
Reply to
ranger1229

Hey Adam, You have a couple of options. Your best option is number 1 as that is what PBXLance was built for.

  1. You can go to
    formatting link
    and try posting your need there. PBX tech's will bid on the project for you and you can read their qualification then choose one of them.

  1. You may try
    formatting link
    and see if someone is out there looking for contract type work.

  2. You can try posting in a few places as well:
    formatting link
    - BCM/Norstar Forums
    formatting link
    - Yahoo BCM Group

Good Luck!

Adam Grover wrote:

are in need of a tech to assist us with a few programming questions. It would be several hours and could be done remotely on the weekend if the tech would like. Please contact me via email at snipped-for-privacy@mediaimages.com or by phone at (614)

410-3000 ext. 104. Or if you just so happen to be in or near Columbus, Ohio it could be done on site.
Reply to
3z3k3l

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.