12 discussions on Cabling-Design.com Forums about the Napco MA3000: what owners asked, what went wrong, and what fixed it.
Hello All,Additional input. I was at the customers home yesterday and found the following.The wiring for line seizure was completed properly.The voltage for ON Hook was at 46.28 vdcThe voltage for OFF Hook was at 11.89 vdcThe RING voltage...
Long time customer moved into house containing Napco 8-zone Panel,two GEM-RP1CAe2 Keypads, and all windows and doors contacted, severalCO's, System Sensor SD's, motion detectors, and six or eight zonemodules positioned adjacent to the...
Does anyone know how to get the MA3000 to send a daily test signal, as required by NFPA, on both phone lines. No problem sending test on telco 1, just don't know how to make it test on telco 2. On our commercial fire alarms, each line...
Just wondering what people out there have and how they like it.I am a newbie to the group and trying to put my own system together.Besides it is always cool to see what others have hooked up.Thanks,Pete
Building new house and interested in recommendations on the best alarmsystem to install. I will most likely be doing the work myself. I haveinstalled three full systems (2 DSC and 1 Moose) thus far and havenever had a problem with them. ...
For all you Napco freaks in Metro NYC Area:Napco and Elcor are donig a presentation at:Huntington Hilton Hotel, Route 110, MelvilleOn: Thursday, March 16 at 6-9PMFeaturing: Kenny Kramer (Seinfelds "Real" Kramer) and Napco Rep Joe...