Re: Trying to work with a CM11A under Linux
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
18 discussions on Cabling-Design.com Forums about the Linksys WUSB11: what owners asked, what went wrong, and what fixed it.
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
Hello.I've been searching around for awhile now, trying to find some good information about antennas and have come up with pretty much nothing.I've noticed there are a lot of places selling antennas for 802.11 systems and the prices vary...
HiI've just installed a wireless network for use with the internet. It works fine except for the connection to my PC (Wxp sp2) . My Linksys Wireless-B USB Network adapter (WUSB11) is used there.It works fine except when I shut down the PC...
"you are connected to the Access point but the Internet cannot befound"Let me see if I can explain this (apparently, scanning other posts forfixes, common) problem simply.I see dozens of posts out there relating similar connection...
Hi All,I've got a wireless network running that I'd like to add an HP printerthat has an internal print server card. Is there a device (besides aPC or Notebook) that I could connect my printer to via straightthrough/cross over cable that...
I currently have an Atheros AR5212A minipci wifi card installed in myT23 laptop. I ran my own coax cables to two Linksys 7dbi antennason the back of the LCD. Works OK but sometimes I have to get closerto my router, aquire the signal then go...