Re: Trying to work with a CM11A under Linux
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
37 discussions on Cabling-Design.com Forums about the Linksys WPC11: what owners asked, what went wrong, and what fixed it.
This is exactly what the problem is, now I have to make my appliancemodule respond to the On and Off commands, the lamp module is workin glikea champ.
I read in the RV forums that people are connecting to the internetfrom their RV's.I have an old Gateway laptop with a Pentium II in it. It is runnigWindows 98SE. It has a Linksys model WPC11 notebook adapter that worksfine around the house....
I have a Linksys BEFW11S4 Wireless-B router. When I installed it, I used128-bit WEP compression on it and saved a passphrase.My laptop's OS crashed a couple of weeks ago and I figured it was a goodtime to upgrade to Windows XP.I can see my...
I am running two laptops that have wireless NIC cards installed, both areconnecting wirelessly and perfectly to the internet ( going to the routerand then thru a cable modem)My problem is file sharing, on one machine my network places shows...
Problem: When I disable Broadcast SSID my laptop cannot find thenetwork. As long asbroadcast SSID is enabled it works OK.Router COnfig: Linksys BEFW11S4 Version 4 Firmware 1.52.02 (mostcurrennt)Wireless: EnabledBASIC WIRELES SETUP...
Hi all,Does anyone know where (or if) I can get 16-bit drivers to run aWPC11 under DOS or Windows 3.11 (WFW)? I can't find anything directlyfrom Linksys - there is nothing on their web site and their FTP sitehas no documentation for most...