15 discussions on Cabling-Design.com Forums about the Cisco AP1200: what owners asked, what went wrong, and what fixed it.
I have a Cisco Aironet 1200B wireless access point and I would like toupgrade the software, I have had a good look aroung the Cisco websiteand honestly my head is spinning, could someone please explain theprocess in simple terms,I have...
Hello,We have a Cisco AP1200 network with 12 AP's and 15 klients roamingbetween them.The problem is that all 15 clients (cisco 350 cards) looses ip after 30- 40 mins.Clients need to be restarted in order to get the system back up.I have no...
Hello,We have a Cisco AP1200 network with 12 AP's and 15 klients roamingbetween them.The problem is that all 15 clients (cisco 350 cards) looses ip after 30- 40 mins.Clients need to be restarted in order to get the system back up.I have no...
Hi.. hoping someone can assist..We have a few Cisco AP1200's that doesn't seem to be accepting anyconnection from the clients.Here's what I've discovered so far..- event logs doesn't show any info or errors- I can't see the AP in...
Hi I have just had a radio failure on one of our Cisco AIR-AP1231G-E-K9 access points. A reload fixed it but I would like to try and figure out what happened. Can anyone suggest what might be the problem? Here the log contents prior to the...
HiWhen assigning vlans via radius on Cisco Ap1200's is it possible to drop auser into the native vlan the same way you would with a tagged vlan?example :-My ap has several vlans tagged into the ethernet interface lets call themvlan id's 10,...