Cisco 2621XM

12 discussions on Cabling-Design.com Forums about the Cisco 2621XM: what owners asked, what went wrong, and what fixed it.

What owners report

T1 issue

Every now and then, links to my remote offices are lost due to T1failures. The symptoms of the malfunction line involve extended pingsshowing dropped packets. Other times, no traffic will pass through thelink at all; the T1 module...

Cisco router for home usage

Persuing a CCNA (and later CCNE) cert, I need some Cisco gear, at least to be able to work in IOS. I currently have an 827, connected through ATM to my ISP.I'll be switching ISP (probably for ADSL2), and need a non-ATM thingy.Because of my...

2620XM and 2621XM

I have Cisco 2620XM and a 2621XM routers that will not hold an IOSimage. I was trying to teach myself how to use xmodem and tftp. Whenit is all loaded it seems like everything is allright but when I gotoshow flash it says that there isnt...

2621XM Problem (Probably Easily Resolved!)

Hi folks,I have a Cisco 2621XM router. My problem is that when I power it up, it goes through the initial loading routines ok, but when it comes to the point:----------------"router-name" con0 is now availablePress RETURN to get...

2600 Memory Questions

I'm getting ready to load a new IOS in my 2611XM that requires 128MB.Show Version indicates that 96MB is installed now.Since 128MB is the minimum recommended RAM, is there any reason to putmore in (not running BGP)? For example, one new...

internal name servers stop recursive lookups

This is weird - I hope it rings some bells with someone as I have noIdea what is going on.I have a Cisco 2621XM. We have 5 tunnels from it. One to a cosinerouter which is quite heavily used and the other to home networks,Dratek 2600. All...

All discussions