Cisco Systems

14705 Threads Posts
to

IPVB Subnet Mask

Hi, Could anyone tell me when converting an IPV4 address into the IPV6 format how is the subnet mask carried over..??? i...
1 comments posted 20yrs
posted by 29killeen
1 comments posted 20yrs posted by 29killeen

VPN device AND a PIX

I am building the infrastructure for a remote office using an inexpensive RR cable connection to provide Internet acces...
0 comments posted 20yrs
posted by greg.lowell
0 comments posted 20yrs posted by greg.lowell

Re: TACACS+ authentication

Hi, I'm currently implementing TACACS+ authentication and authorization in our network which consist of multiple vendor...
0 comments posted 20yrs
posted by kanagaraj.k
0 comments posted 20yrs posted by kanagaraj.k

Convert from 100 FX to 1000 SX

I need to hook up a Cisco Catalyst 2950 to a port on a Cisco 3550 24-FX switch. Since the ports on the FX are all 100 F...
2 comments posted 20yrs
posted by stokerk
2 comments posted 20yrs posted by stokerk

PPTP VPN through PIX515

Hi all, I upgraded a PIX515 from 6.3 7.0.4 IOS. According to the upgrade-docs, the new IOS does not support PPTP anymor...
0 comments posted 20yrs
posted by ueli.kessler
0 comments posted 20yrs posted by ueli.kessler

ftp server to upload ios

Which fftp server is recommended for uploading IOS to the routers. I am getting a (No such device) on trying to copy th...
5 comments posted 20yrs
posted by rsiffredi
5 comments posted 20yrs posted by rsiffredi

2950 empty mac address table

Hi all, I've got a catalyst 2950 switch running IOS 12.1(9)EA1d and for some reason, show mac-address-table doesn't lis...
6 comments posted 20yrs
posted by bhalicki
6 comments posted 20yrs posted by bhalicki

Good Oppurtunity: Position- Radius Engineer

We have a Software Engineer -Radius position available. Any one interested can forward your resume to krishna_k_gutti a...
0 comments posted 20yrs
posted by krishna.gutti
0 comments posted 20yrs posted by krishna.gutti

6509 power consumption

I've got a couple of 6509s running 2500 watt power supplies which plug into 20amp circuits. The "show power" readings i...
1 comments posted 20yrs
posted by supermikester
1 comments posted 20yrs posted by supermikester

c2611 Equivalent EDO DRAM : 5 volts vs. 3.3 volts

I recently purchased 64 meg of EDO DRAM for my c2611 and it was sold as equivalent to cisco memory. It is a Micron part...
1 comments posted 20yrs
posted by john.mckay
1 comments posted 20yrs posted by john.mckay

IPSec VPN through NAT

Hi all, I do need a solution to create VPN between 70 remote sites and a central site, all equiped with Cisco IOS route...
1 comments posted 20yrs
posted by jks_bcn
1 comments posted 20yrs posted by jks_bcn