Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Site-to-site VPN with NAT

Can I construct a site-to-site VPN between 2 PIX 501's and use a natted network between the sites? Is this possible with...
2 comments posted 20yrs
posted by jhgraves
2 comments posted 20yrs posted by jhgraves

Excessive Traffic?

I wanted to send a print screen of what I am seeing on our PIX 515, using ASDM 5.1. What is concerning me is the Input...
1 comments posted 20yrs
posted by ruttrow
1 comments posted 20yrs posted by ruttrow

Help with "Global" command

Hi I'm doing the following in my new DMZ: nat (dmz2) 0 x.x.x.64 255.255.255.240 0 0 My question is do I need a "global"...
1 comments posted 20yrs
posted by dan.track
1 comments posted 20yrs posted by dan.track

IOS for wide array of hardware

I have spent the last few days reading posts about getting IOS for certian types of Cisco hardware, and I think that I...
13 comments posted 20yrs
posted by gould.michael
13 comments posted 20yrs posted by gould.michael

Can't seem to get 802.1x to work

Hey all, I'm trying to setup 802.1x using PEAP authentication. I have the following setup in my lab: 2003 Server runnin...
2 comments posted 20yrs
posted by angrylife
2 comments posted 20yrs posted by angrylife

Output from TFTP and / or ping

Hi, When TFTP'ing and pinging you could folow the process by exclamation signs. Sometimes you see an "." or "O" in TFTP...
1 comments posted 20yrs
posted by no.spam
1 comments posted 20yrs posted by no.spam

catalyst 2960 port bandwidth control

hi ! is it posible to control bw on port basis for this switch catalyst 2960 iso 12.2. for example i need to limit bandw...
0 comments posted 20yrs
posted by bborovac
0 comments posted 20yrs posted by bborovac

ospf sequence numbers

hello, I am preparing for ccnp -routing .Can someone send a link ,that explains the lollypop -shaped sequence number spa...
2 comments posted 20yrs
posted by balajinw
2 comments posted 20yrs posted by balajinw

logging level on asa

Hi, We've configured a syslog server where our ASA 5510 can log to. A trap is configured like"logging trap errors". How...
2 comments posted 20yrs
posted by relaxteb
2 comments posted 20yrs posted by relaxteb

Multicast issue with Cisco 3200

This is my setup: source-----C2955-------C3200------receiver-2 | receiver-1 The Cisco 3200 is configured with two VLANs...
0 comments posted 20yrs
posted by dan0pe
0 comments posted 20yrs posted by dan0pe

Frame Relay as NBMA network

Hi, I'm aware that Frame relay is an NBMA network and it means it cannot broadcast packets. 1. What is the meaning it c...
3 comments posted 20yrs
posted by davidsudjiman-list
3 comments posted 20yrs posted by davidsudjiman-list

LAN-to-LAN with ASA55xx or routers

we're renting 100Mbit/s LAN-to-LAN connections from one sentral site to about 10 remote offices. When upgrading the net...
2 comments posted 20yrs
posted by no-address
2 comments posted 20yrs posted by no-address