Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Cat 4003 issue

HI All, Can anyone tell me please what does the following mean? %SYS-4-P2_WARN: 1/Host 02:01:00:00:00:00 is flapping be...
2 comments posted 20yrs
posted by rewtenator
2 comments posted 20yrs posted by rewtenator

vpngroup to pix515 (repost 2)

I apologize in advance for re-posting the same question. I'm only trying to solve an issue. environment: pix 515, runni...
2 comments posted 20yrs
posted by davidspollack
2 comments posted 20yrs posted by davidspollack

Access to remote network across a VPN

I have the following setup 10.3.0.0 10.1.0.0 Internet 10.2.0.0 I can talk from 10.1.0.0 to 10.3.0.0 10.3.0.0 to 10.1.0....
5 comments posted 20yrs
posted by scott-i
5 comments posted 20yrs posted by scott-i

How to Make a Pix 501 Console Cable?

I have lost the original DB-9 to RJ-45 cable that I used for console connections. I already have standard patch and cro...
2 comments posted 20yrs
posted by jaylucas
2 comments posted 20yrs posted by jaylucas

Dial Backup from 1750 into a 3640

Hi all....I could really use some help on this one. I have one remote site using a 1750 cisco router. Our HQ uses a 364...
10 comments posted 20yrs
posted by steve.swinney
10 comments posted 20yrs posted by steve.swinney

VOIP

Is there a way to configure a Cisco VOIP router to accept calls to its IP address? Right now I have to dial 2001@192.16...
0 comments posted 20yrs
posted by mike7411
0 comments posted 20yrs posted by mike7411

PIX515 - VPN on logical interface

I would like to create a site to site vpn between 2 location, lets call them Site A and Site B. I set up on Site A an i...
0 comments posted 20yrs
posted by dominsz
0 comments posted 20yrs posted by dominsz

VPN client & PIX with Windows 2003 CA & RADIUS

Hi all. I have configured pix with rsa-sig. (isakmp policy 10 authentication rsa-sig) and RADIUS Authentication. On the...
0 comments posted 20yrs
posted by achilles_mj
0 comments posted 20yrs posted by achilles_mj

Roaming between Cisco 1242 and WS2000 AP300

Hi, Can anyone tell me if there is a configuration that will allow a mobile device to roam from a Cisco AP to Symbol AP...
1 comments posted 20yrs
posted by kfriday
1 comments posted 20yrs posted by kfriday

2 IP ranges on PIX WAN

Hi, I would like to find out how to assign 2 x /24 ranges to a pix outside interface, is there a sample config out there...
5 comments posted 20yrs
posted by mark
5 comments posted 20yrs posted by mark

accounting for failed calls

gentlemen, I use several cisco 5300 remote access servers. My radius accounting is correctly setupped but the RAS only...
2 comments posted 20yrs
posted by arnaud_demarty
2 comments posted 20yrs posted by arnaud_demarty

site-to-site VPN tunnel with remote VPN clients

Hi there - We have a situation where we have site to site VPN tunnel between our 2811 router in the UK and our parents...
0 comments posted 20yrs
posted by david.mitchell
0 comments posted 20yrs posted by david.mitchell

MultiCasting over Multiple Vlans.

Hi All, Can someone point me in the right direction on how to route multicast traffic over multiple vlans, its a problem...
0 comments posted 20yrs
posted by WKA0.net
0 comments posted 20yrs posted by WKA0.net

port flapping and web filter

I have persistent syslog message being sent from my 4510R regarding 'vlan 4 is flapping between two ports'. One of the...
0 comments posted 20yrs
posted by nospam
0 comments posted 20yrs posted by nospam

Changes to PIMv2 for supporting multicast vpn

Hi, I would like to know the changes that may be required to existing PIMv2 protocol to adapt to a multicast VPN. Kindl...
0 comments posted 20yrs
posted by arut
0 comments posted 20yrs posted by arut