How to Make a Pix 501 Console Cable?

I have lost the original DB-9 to RJ-45 cable that I used for console connections. I already have standard patch and crossover cables, as well as a build-it-yourself DB-9 to RJ-45 adapter kit. However, the documentation that I've found on building these cables seems suited for a rolled ethernet cable, of which I do not have. Does anyone know the proper DB-9 to RJ-45 pinout when using either a patch or a crossover? If so, please let me know.



Reply to
Loading thread data ... napisal(a):



DB-9 1,2,3,4, 5 ,6,7,8,9 RJ-45 n,3,6,7,5 & 4,2,8,1,n patch cable only

it means:

1 and 9 from DB-9 are not connected pin 2 from DB-9 connected with 3 from RJ-45 pin 5 DB-9 is connected to two pins from RJ-45 5 & 4

Best regards

Reply to

Thanks Achilles,

That did it!!!


Reply to Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.