Cisco Systems

  1. Home
  2. Cisco Systems
14704 Threads Posts
to

Worth reading in Cisco Systems

Catalyst 3750G / Network design question

Hello and thanks, I have a vendor that is setting up our network and I am not sure if something they are doing is a goo...
6 comments posted 20yrs
posted by rozment
6 comments posted 20yrs posted by rozment

PDM and VPN

I have a question about what i am reading in the PDM for my PIX 501. When I look under access rules I see the following...
6 comments posted 20yrs
posted by khill
6 comments posted 20yrs posted by khill

PIX and microsoft VPN

I just inherited a netowrk that uses a PIX-501 and a Microsoft box for VPN. The MS box had two nics inside one for the...
2 comments posted 20yrs
posted by khill
2 comments posted 20yrs posted by khill

vlans and cisco 4500s

I got some cisco 4503s that home run to a 4506. From the 4506 it goes to the internet. We are currently on layer 2. Wha...
12 comments posted 20yrs
posted by none
12 comments posted 20yrs posted by none

PIX - turn off DHCP

New client wants to turn off DHCP on a pix; I assume I just say "no" to dhcpd enable inside or do I need to say "NO" to...
2 comments posted 20yrs
posted by support
2 comments posted 20yrs posted by support

VTP Traps Generation

Hi all, "VTP Traps Generation" is disabled in my catalyst 2960. How can i enable it ? Can you please explain for what th...
2 comments posted 20yrs
posted by Rahan
2 comments posted 20yrs posted by Rahan

Default Route(s)

Hello, I have 4 sites on a private sprint provided mpls network. Each site has it's own internet connection. I would li...
3 comments posted 20yrs
posted by gatornation11
3 comments posted 20yrs posted by gatornation11

Need help with Networking

Hello to all, Hope i am posting in the right group if not point me in the right direction. I have 2 sites. A remote sit...
0 comments posted 20yrs
posted by ZooOYork
0 comments posted 20yrs posted by ZooOYork

7905 die during CCM upgrade

During an upgrade from CCM4.1(2) to CCM4.1(3) we upgraded the image on our 7905's to the CP790508000SCCP. The vast majo...
1 comments posted 20yrs
posted by castleford
1 comments posted 20yrs posted by castleford

EIGRP / OSPF priority

I've got a problem with the distribution of a route in an environment using both EIGRP & OSPF. I have a pair of 6509 sw...
2 comments posted 20yrs
posted by can2002
2 comments posted 20yrs posted by can2002

Pix & limit number of connections per host?

Hello, is it possible to tell a Pix515 (software 7.2(1)4 to limit the number of simultaneous connections to a given hos...
3 comments posted 20yrs
posted by gartmann
3 comments posted 20yrs posted by gartmann

Can a FWSM route between 802.1q VLANs?

Greetings I'm currently investigating possible configurations of a Cisco 6500 with MSFC and a newly installed FWSM. The...
2 comments posted 20yrs
posted by fredrik.hofgren
2 comments posted 20yrs posted by fredrik.hofgren

which router should i set as ospf dr router ?

hi ^^ please give me some advice - i'm trying to build ospf routing protocol. i have four router. two of them(in this c...
2 comments posted 20yrs
posted by jh3ang
2 comments posted 20yrs posted by jh3ang

PIX PDM 3.0 - Cannot Add ACL DMZ to Outside

Hi all, This problem had bodering me for a month, please help. I having problem to add ACL DMZ any to Outside any with...
1 comments posted 20yrs
posted by myswee
1 comments posted 20yrs posted by myswee