Cisco Systems

14701 Threads Posts
to

What if no IOS on 1100?

Hi guys, I got an 1100 series AP. I wonder what might happen if the device would lose te IOs, seen it doesn't have any...
1 comments posted 20yrs
posted by am
1 comments posted 20yrs posted by am

871 and Static PPPoE

Hi, I've been trying to get an 871 to work with Static PPPoE. Does it even support this? I've tried to configure the PP...
3 comments posted 20yrs
posted by kenknight-nospam-
3 comments posted 20yrs posted by kenknight-nospam-

outbound NAT on a 3640

I am trying to setup outbound nat on a 3640 with 2 interfaces. I have followed Cisco's reccomended config as closely as...
7 comments posted 20yrs
posted by kevin.noall
7 comments posted 20yrs posted by kevin.noall

VPN to another network

I would really appreciate any help on this topic. I have the following situation: NetA (192.168.0.0/24) | | 192.168.0.1...
2 comments posted 20yrs
posted by whytwelve13
2 comments posted 20yrs posted by whytwelve13

outbound nat on a 3640

I am trying to setup outbound nat on a 3640 with 2 interfaces. I have followed Cisco's reccomended config as closely as...
1 comments posted 20yrs
posted by kevin.noall
1 comments posted 20yrs posted by kevin.noall

Call Manager: retaining IP phone MAC addresses

I am running Call Manager v.4 and I have a fairly simple request. I want to be able to have CM to send on to a downstre...
1 comments posted 20yrs
posted by pmatulis
1 comments posted 20yrs posted by pmatulis

PDLM for NBAR

Where i can find and download newest PDLM files for NBAR? Why on the: http://www.cisco.com/pcgi-bin/tablebuild.pl/pdlmis...
0 comments posted 20yrs
posted by rzirzi
0 comments posted 20yrs posted by rzirzi

VLAN setup with Linksys SRW2016

I'm having many difficulties setting up VLANs with Linksys SRW2016. Specifically trunk a port doesn't operate as expect...
3 comments posted 20yrs
posted by boazrf
3 comments posted 20yrs posted by boazrf

DMZ Switch Problems on ASA Failover

I have a couple of ASA devices - the subnets they sit on are as follows: Inside - 172.29.1.0 / 24 (ASA's are .6 & .7) D...
3 comments posted 20yrs
posted by darrenfgreen
3 comments posted 20yrs posted by darrenfgreen

Multiple VPN endpoints on one Pix

Hi, i've got a pix with two internet connections. Im trying to move one of our site-to-site IPSEC tunnels from one of t...
1 comments posted 20yrs
posted by davidspollack
1 comments posted 20yrs posted by davidspollack

grp=b sso redundancy

hi folks, been searching the cisco.com website for a while now but i can't really figure out the answer to which factor...
0 comments posted 20yrs
posted by nightsky
0 comments posted 20yrs posted by nightsky

Dynamic and peer-to-peer VPN on the same PIX

Hi all. I need to have dynamic VPN on a PIX on which I have some peer-to-peer VPNs up and running. I would have VPN cli...
0 comments posted 20yrs
posted by chino75
0 comments posted 20yrs posted by chino75

Cisco 2621 and 10Mbit Internet connection

I recently ordered a 10Mbit copper ethernet connection from my isp. They dont provide a router so I am looking at the C...
4 comments posted 20yrs
posted by tullid
4 comments posted 20yrs posted by tullid