Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Worth reading in Cisco Systems

MPLS with Diff-Serv

Bonjour, A basic question about the label in MPLS. Normally, the label is used to forward the MPLS packet to the next h...
1 comments posted 19yrs
posted by mhostettler
1 comments posted 19yrs posted by mhostettler

capture question pix 6.3

hi, trying to debug syslog, admin tells me, he doesnt receive any packets, obviously pix (172.27.0.156.514)is sending s...
5 comments posted 19yrs
posted by mak
5 comments posted 19yrs posted by mak

DynDNS

Hi there ! Some of the "small" routers (800) seem to have learned DynDNS - but what about the bigger models or even PIX...
1 comments posted 19yrs
posted by frank-usenet
1 comments posted 19yrs posted by frank-usenet

frame-relay multilink

I have a hub & spoke setup and just got an additional T1 installed at the central office (3620) I can bring up both int...
3 comments posted 19yrs
posted by mark.arneson
3 comments posted 19yrs posted by mark.arneson

not enough space ios upgrade

I am trying to upgrade my 3750G-TS switch currently running IOS (tm) C3750 Software (C3750-I9-M), Version 12.1(11)AX, R...
5 comments posted 19yrs
posted by none
5 comments posted 19yrs posted by none

Howto Show RIB and FIB ?

Hi all, I'm currently looking for a command on the Cisco to see the FIB and RIB. The "show ip route" command only displ...
5 comments posted 19yrs
posted by frederic.metz
5 comments posted 19yrs posted by frederic.metz

Gigabit WAN

Planning to connect two remote sites different LANs and VLANs via Gigabit Ethernet. Both sites have Cisco 6000 running...
2 comments posted 19yrs
posted by fjumayao
2 comments posted 19yrs posted by fjumayao

HELPME: Prefered Routing using Dialer Watch.

Hi All, Have you ever tried to implement dialer watch? Yes, I know this is not the best way to implement dial backup wh...
2 comments posted 19yrs
posted by davidsudjiman-list
2 comments posted 19yrs posted by davidsudjiman-list

Nat-traversal alternative?

We have a PIX 501 running 6.2 and are having problems with some clients connecting via VPN that are behind wireless rou...
1 comments posted 19yrs
posted by john.tressle
1 comments posted 19yrs posted by john.tressle

Routing loss with mppp

I've been experiencing an odd problem with a pair of 2851 routers linked via ISDN BRI. The dialer interfaces come up as...
3 comments posted 19yrs
posted by can2002
3 comments posted 19yrs posted by can2002

Aplication Control Engine (ACE) AAA Configuration

Is there anyone dealed with ACE AAA configuration. I am looking for Tacacs+ or Radius authentication availability for A...
0 comments posted 19yrs
posted by etakay
0 comments posted 19yrs posted by etakay

dialer watch problem

am usimg FR links and ISDN as backup using dialer watches. What I've noticed that if router is rebooted and primary lin...
2 comments posted 19yrs
posted by no
2 comments posted 19yrs posted by no

E61

Hi guys, Did anyone find a documentation that details E61 configuration with Call Manager using skinny? Regards, Andy
0 comments posted 19yrs
posted by dandashi
0 comments posted 19yrs posted by dandashi

MSS on router, why?

Hello! What is MSS on a router good for? Usually the client -> server send their MSS in the SYN packet. So why do I need...
3 comments posted 19yrs
posted by christian3034
3 comments posted 19yrs posted by christian3034

PIX 501 Connection issue

I am having trouble with getting a connection to a Pix 501. I am trying to connect with the cisco client from a remote...
2 comments posted 19yrs
posted by NicholasAA
2 comments posted 19yrs posted by NicholasAA