Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Worth reading in Cisco Systems

ISDN interfaces in North America

Is it possible to connect an ISDN router with an S/T interface to the carrier network without an external NT1? From som...
2 comments posted 19yrs
posted by captainx0r
2 comments posted 19yrs posted by captainx0r

site-to-site VPN in differenet IOS for PIX device

Hi, all, We are going to upgrade the PIX515E IOS 6.3 to the IOS V7.2; however we found that no upgrade IOS for PIX506E...
3 comments posted 19yrs
posted by bensonlei
3 comments posted 19yrs posted by bensonlei

Cisco ASA5510 and GRE Tunnels?

Anyone can tell me if the ASA5510 can make GRE tunnels? thank you! Xavi
1 comments posted 19yrs
posted by xaviveral
1 comments posted 19yrs posted by xaviveral

Cisco OID , active ISDN channels

Dear All Guru : Anyone know how to get the active isdn channels , from the OID ? cisco>sho isdn status 0 Layer 3 Status...
1 comments posted 19yrs
posted by jengjr
1 comments posted 19yrs posted by jengjr

CEF table on 3750 contains inactive next-hops

Hello Everyone, I have policy based routing setup on our 3750s located at 4 remote sites. I have setup the policy based...
0 comments posted 19yrs
posted by apsolar
0 comments posted 19yrs posted by apsolar

CCNA - ICND question help

I need help on a question from the CCNA-ICND test. I didn't pass for a second time, and got the exact same score of 837...
4 comments posted 19yrs
posted by kade714
4 comments posted 19yrs posted by kade714

VLAN interfaces on Layer 2 switch

As far as i know Cisco switches 2950 and 2970G is Layer 2 and is unable to route between VLAN's. Am I right on this? I...
3 comments posted 19yrs
posted by usenet
3 comments posted 19yrs posted by usenet

VLAN on a switchcard and secondary IP

Hi, I've got a 1721 with an ESW-4 Switch attached to it. I decided to use a range of 192.168.0.0/26 as my homenet for n...
4 comments posted 19yrs
posted by lukas.schratz
4 comments posted 19yrs posted by lukas.schratz

Help getting started on CCNA required

Hi, I'm an IT professional just about to start studying for the 640-802, I have little experience of Cisco equipment bu...
3 comments posted 19yrs
posted by SpamSpamSpam
3 comments posted 19yrs posted by SpamSpamSpam

MSTP Query

Hi, What should be the state of the port whose msti force port state is disabled.Should it be forwarding or discarding?...
0 comments posted 19yrs
posted by tweety200512
0 comments posted 19yrs posted by tweety200512

Floating Virtual IP

Hello, Does anyone know if this setup is possible and if so, which router or device can do this. Virtual floating IP. S...
5 comments posted 19yrs
posted by geekfromny
5 comments posted 19yrs posted by geekfromny

Convert Cisco 857 to 857w?

Hello all, I have a Cisco 857w with the POTS ADSL dead because of a lightning storm, the router is operationnal but the...
3 comments posted 19yrs
posted by bin
3 comments posted 19yrs posted by bin

using L2 connection as Point-To-Point

this all seems to work well, though i would like any comments you might have as to the methods i used VLAN555 is only t...
0 comments posted 19yrs
posted by rsurfer
0 comments posted 19yrs posted by rsurfer