Cisco Systems

New FR Circuit Wont Stat Up

We just added a new FR circuit to our network. No alarms on smart jack or Adtran CSU/DSU. However, I can't get the circ...

4 comments posted 18yrs

posted by JohnD

4 comments posted 18yrs posted by JohnD

Installation of second WAN T1 csu/dsu in Cisco 2600

Hello, I am curious if there is something else I need to do. I powered down my router and slid the second card in and t...

1 comments posted 18yrs

posted by raider.adam

1 comments posted 18yrs posted by raider.adam

Upgrading FW on 2921

Currently IOS (tm) C2600 Software (C2600-JS-M), Version 12.0(28a) ... 32K bytes of non-volatile configuration memory. 1...

3 comments posted 18yrs

posted by tom

3 comments posted 18yrs posted by tom

Tasman 4100: cannot ping, redundancy backup problem?

Hello, I have a Tasman 4100 and am trying to upgrade the firmware. I am not a techie so please bear with me. The proble...

0 comments posted 18yrs

posted by amjas

0 comments posted 18yrs posted by amjas

PIX object-groups automatically created named "_ref" ?

Hi, After upgrading our PIX 525 from version 6 to 8 I noticed the access- lists and object-group command behaviour has...

1 comments posted 18yrs

posted by thefunnel

1 comments posted 18yrs posted by thefunnel

Policy NAT

Hi guys, We have a nat 0 (nat exemption) network setup that uses PIX firewalls, I am trying to implement policy NAT to...

5 comments posted 18yrs

posted by guyeley

5 comments posted 18yrs posted by guyeley

DNS

Hi there ! Picking up an older thread. I still have some questions concerning DNS. Finally, I succeeded in configuring...

0 comments posted 18yrs

posted by frank-usenet

0 comments posted 18yrs posted by frank-usenet

Pix 501 - Help!

Where do I start? We had two Pix 501's attached via dual network cards to two servers which worked fine (one used Proxy...

0 comments posted 18yrs

posted by tony

0 comments posted 18yrs posted by tony

OSPF & ISDN Backup Problems

Hi Guys, I'm re-posting again, but this time I will explain my network better. We have recently switched over to MPLS....

4 comments posted 18yrs

posted by marek.bajor

4 comments posted 18yrs posted by marek.bajor

871w wireless clients can't get to each other

Working with a Cisco 871w, relevant part of config posted below. The issue is that wireless clients can't get to each o...

0 comments posted 18yrs

posted by evergladesfl

0 comments posted 18yrs posted by evergladesfl

VPN- IPsec and IKE

Hi Guys, The basics of VPN understand is the meaning of IPSEC and IKE. We must understand these topics ion order to enh...

0 comments posted 18yrs

posted by dineshaggarwal

0 comments posted 18yrs posted by dineshaggarwal

PPTP behind 2821 - help!

I have a Win2003 server that accepts MS RRAS PPTP VPN connections. Or rather, it did until I moved them from the cheap...

4 comments posted 18yrs

posted by nntp

4 comments posted 18yrs posted by nntp

IP Inspect and Browsing issues

Hello. I'm having a few problems getting my ip inspect statments working properly. I have an inspect list that covers T...

1 comments posted 18yrs

posted by tfskelly

1 comments posted 18yrs posted by tfskelly

OSPF and ISDN Backup

Hi Guys, I have a question. I'm currently running OSPF on all of the routers and I'm having problems with ISDN backup l...

6 comments posted 18yrs

posted by marek.bajor

6 comments posted 18yrs posted by marek.bajor

NAT For Server Using An IP In Use ..

Hello .. I have 2 networks connected VIA VPN. I have a statement which looks like: ip nat inside source list 101 interf...

3 comments posted 18yrs

posted by geekfromny

3 comments posted 18yrs posted by geekfromny