Upgrading FW on 2921

Currently IOS (tm) C2600 Software (C2600-JS-M), Version 12.0(28a) ...

32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read/Write)

I upgrade the flash memory from 8MB to 16MB Trying to upgrade to 12.3(9), which is what I have on my other router. Used following to upgrade that one (from 12.1 IIRC)

csco#tar /x tftp://10.0.0.16/a.tar flash: ^ % Invalid input detected at '^' marker.

But obviously doesn't work here. How do I download it to the flash on this one?

10.0.0.16 is an OpenVMS system running bootp.

Tom

Reply to
Tom Linden
Loading thread data ...

don't have that command. csco#a? access-enable access-profile access-template

Reply to
Tom Linden

then unarchive the tar archive on a PC using winzip and then copy the extracted binary using tftp

Reply to
Merv

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.