Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Problem with Vlan in Printserver
Hi there I have a problem using printservers between 2 Vlans. My default Vlan is Vlan 100. When I have à desktop and the printserver in the same Vlan, everthing is ok. When I move the printserver or...
1
|
12 years ago
|
1 | |
|
|
packet showing up on port 0 when I telnet to port 80?
I have a GNS3 LAB with 3 routers. I am trying to do a reversible NAT for several thousands of ports to the server. (R1) for this purpose. I try to telnet from R3 to R1 on any port (lets say 80 in this...
6
|
12 years ago
|
6 | |
|
|
etherchannel load-balancing and unpredictability
I have a question regarding etherchannel load balancing. I've got a 4507R switch connected to a 3560 switch by means of two content filters which are acting as transparent bridges. The two ports on...
2
|
12 years ago
|
2 | |
|
|
NM-CE-BP-80G-K9 functionality
NM-CE modules have become pretty cheap and I was wondering whether they can be configured to serve up simple static files by http and/or ftp. I'm embarrassed to say that I can't really tell from...
—
|
12 years ago
|
— | |
|
|
Cisco 2621 not connecting to specific sites, but can resolve the name to IP
Hello, I have a cisco 2621 router connected to a comcast modem. The router works for all sites, but one. The router can resolve the name of the site to an IP address, but won't connect to it. Have...
3
|
12 years ago
|
3 | |
|
|
LACP Aggregate Issues - Sun -> Cisco
We are working with a Sun M5000 (connected to a Cisco 6509) server and are utilizing 2 gigabit cards to handle 2 lacp aggregates as follows Key 1: Public routed ip address Policy: L4 LACP Mode:...
—
|
12 years ago
|
— | |
|
|
Cisco phones bandwidth
Hello, Can someone tell me how much bandwidth Cisco phones use in general? We have the models Cisco 7961 and 7941. Thank you
2
|
12 years ago
|
2 | |
|
|
How to remove BOOT variable (Cat 6500 IOS)
Hi, all, we just bought two refurbished Catalyst 6500 switches which work fine except one minor problem. One of the switches sticks at the rom monitor, when powered on or reloaded. The error message...
4
|
12 years ago
|
4 | |
|
|
Content filters configured as transparent bridges and spanning tree
I've got a situation where I need to connect two switches, a 4507R (our core switch) to a 3560, using two devices which are functioning as transparent bridges, connected in parallel. The devices are...
2
|
12 years ago
|
2 | |
|
|
Software Testing Conference 2011(July 2nd, Bangalore)
Hi , I got to know of an exciting event happening in Bangalore on July 2nd. I guess it will add a great value to all the Testing professionals in the Testing domain. I believe it is worth attending as...
—
|
12 years ago
|
— | |
|
|
Blade HS22 + Cisco 3010X with Cisco CVR-X2-SFP: Uplink to Cisco 2960?
A small progress: We replaced the 10(!) Gb SFP+ Transceiver in the CVR- X2-SFP V02 converter by a 1 (ONE) Gb SFP and connected it to a 1Gb port of our 2960 switch. Now we have a link I mean there is...
4
|
12 years ago
|
4 | |
|
|
Advice regarding device
Good morning all, I would need advice to pick up the right router to connect a 50 mega LL. Which serie should I get ? Regards, Fell
1
|
12 years ago
|
1 | |
|
|
Pix 501 not getting IP address
Hi, My network was: DSL Modem --- Pix501 --- internal My Pix outside interface got the IP dynamically with the ip address outside dhcp setroute command. This worked fine. I recently switched to...
3
|
12 years ago
|
3 | |
|
|
CISCO 3010X: Password Recovery
Dear all, in order to revover the lost password of a 3110X switch we followed exactly the procedure described in Chapter 47 of this manual: After releasing the MODE button we see these messages...
2
|
12 years ago
|
2 | |
|
|
find out the throughput between two network nodes
Hi, Recently, we have found the throughput between two network nodes does not reflect the actual WAN bandwidth: 1. the ordered WAN link bandwidth = 10Mbits/sec 2. found the link speed of the end point...
4
|
12 years ago
|
4 |