Cisco Systems

Routing for Verizon FIOS -- Reward for answer

This is your opportunity to be a Cisco hero (and to earn a tin of incredible cookies, with the first correct answer.) I...

26 comments posted 18yrs

posted by fjames

26 comments posted 18yrs posted by fjames

QoS Classification before WAN Accelerator

I've inherited a semi large corporate network and want to get the QoS cleaned up a bit. The current network is a bit of...

2 comments posted 18yrs

posted by auromed

2 comments posted 18yrs posted by auromed

Routing question

I'm not sure if this is the correct group for this post, if not please let me know. I have a DSL line from CenturyTel a...

2 comments posted 18yrs

posted by csmith

2 comments posted 18yrs posted by csmith

AddRoute failed to add a route: code 87?

I am using 5.0 vpn client to connect to pix 501 ipsec/udp. Cisco Systems VPN Client Version 5.0.01.0600 Copyright (C) 1...

4 comments posted 18yrs

posted by nobody

4 comments posted 18yrs posted by nobody

UK BR ISDN Characteristics

I've been asked to check whether the Telco (BT) has set some ISDN lines as point-to-point or point-to-multipoint. If I...

0 comments posted 18yrs

posted by np

0 comments posted 18yrs posted by np

Looking for router/switch power loads & BTUs

Hi, all! I'm trying to locate information on Cisco switches, routers, and PIX units related to power loads (amps, watts...

1 comments posted 18yrs

posted by SierraPhotog

1 comments posted 18yrs posted by SierraPhotog

VPN performance

Hi there ! I have two working setup for a VPN tunnel into my company LAN. Basically, the two options for a laptop are:...

0 comments posted 18yrs

posted by frank-usenet

0 comments posted 18yrs posted by frank-usenet

Router Stack??

Hi all, Do anyone have any idea about Router stack? Is it possible to stack a router? If possible, how can we do it? Is...

15 comments posted 18yrs

posted by hamsovannary

15 comments posted 18yrs posted by hamsovannary

how to route traffic from server via specific static IP?

Hi all, I have 8 static IP from ISP and I suppose can use 6 IP in range: e.g. x.x.x.205-x.x.x.110 and I want to config...

1 comments posted 18yrs

posted by jason.chan.south

1 comments posted 18yrs posted by jason.chan.south

PIX 501 Multiple Outside Ports to Single Inside Port

PIX 501 Multiple Outside Ports to Single Inside Port. I'm trying to fix our remote e-mail folks. I have no problem forw...

9 comments posted 18yrs

posted by nospam

9 comments posted 18yrs posted by nospam

token bucket algorithm

Any relationship between bucket capacity and burst size? Based on token bucket algorithm, tokens in fully bucket must b...

1 comments posted 18yrs

posted by aaabbb16

1 comments posted 18yrs posted by aaabbb16

serial number for 7600

Hello, I have been asked to supply the serial number for some 7600s - so they can be explicitly identified for insuranc...

2 comments posted 18yrs

posted by jamesjesse68

2 comments posted 18yrs posted by jamesjesse68

PIX 506E as a router

Hello, I've searched and I just have not found a simple answer to this question: Is the PIX safe to use as a router? Le...

4 comments posted 18yrs

posted by jasonodill

4 comments posted 18yrs posted by jasonodill

L2L tunnel, concentrator 3000 to PIX ?

I am trying to setup my concentrator to connect to a PIX over the internet and create a tunnel. I have used directions...

1 comments posted 18yrs

posted by paul814

1 comments posted 18yrs posted by paul814

GRE Tunnel problem with one endpoint in NAT

Hello I have this situation: Branch office: C2611 router - atm0/0.1 public wan eth0/0 lan HQ: C2650 - edge router - has...

7 comments posted 18yrs

posted by admin

7 comments posted 18yrs posted by admin