Using WIC-4ESW as L3 device

Hi all,

Is it possible to use a WIC-4ESW as a L3 device in a IOS based router (28xx)

I noticed the MAC addres of the Fa0/0 is the same as the VLAN interfcae Changing the MAC adress of the VLAN interface gives the error: % "mac-address" not valid on this interface

Reply to
Tom Pouce
Loading thread data ...

Tom Pouce skrev:

You cant put an IP address directly on the interface but you should be able to run diffirent vlans on diffirent ports and use vlan interfaces to route between them.


Reply to
SAto Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.