Router Cisco 7204VXR

May 10, 2006 3 Replies
L

I am experiencing a problem with a Cisco Router 7204VXR with the fastEthernet interface. The board is model



PA-2FE-TX (FE2/0 and FE2/1): the FE2/1 seems to work correctly, while I have problems with the FE2/0. After



putting it up and as soon as a data traffic greater than a ping passes through it, the interface becomes



"frozen", still remaining up. Sometimes this fact causes problems also to the other interface (FE2/1). I also replaced the board, but the problem remains. I observed the presence of a lot of collisions (in



half-duplex mode), while in full duplex-mode neither a ping works.



Thanks in advance for your help



Vote
Twitter Facebook LinkedIn
M

If you replaced the port adpater with a known working adapter and the problem persists, it may indicate that the slot is damaged.

Vote
Twitter Facebook LinkedIn
H

Whan events do you have in your log when this happens? Something should be recorded, and this should give you a clue, what's going on. Put more details in your post.

Also, do you have Cisco support for your router? Why don't youcall TAC to help you with a troubleshooting?

Good luck,

Mike

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required