Re: 1600 router as DHCP server

>>I believe IOS started suppoting this feature with 12.0 thus an IOS >>upgrade will be required. >> > > Am I correct in viewing this box as having : > 4meg RAM and a 6meg flash card, > which might prove difficult to try and load a 12.x image > from another flash card for our 1600 ? > --------- > > Router uptime is 0 minutes > System restarted by power-on > System image file is "flash:c1600-sy-l.113-5", booted via flash > > cisco 1601 (68360) processor (revision C) with 3584K/512K bytes of > memory. > Processor board ID 10700673, with hardware revision 00000000 > System/IO memory with parity disabled > 8K bytes of non-volatile configuration memory. > 6144K bytes of processor board PCMCIA flash (Read ONLY) > > Configuration register is 0x2102 > > Router> > >

Yeh that's nowhere near enough. You need 24Mb RAM and 8Mb flash

Reply to
Ben
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.