Hello all,
I'm going for my CCNA and I have built a home lab with:
2 - Cisco 2501's 1 - Cisco 2502 1 - Cisco 2507 (access server) 1 - Catalyst 2924M-XL 24port switch 1 - Catalyst 2924-XL 24port switch (no M in this one)The problem I have is that on one of my 2501's I do not have ANY CDP commands.. I think I may have screwed the pooch on something so can someone tell me if I have an outdated IOS, and if I do, how much does it cost to upgrade and is it worth it? Thanks..here is the version output:
Cisco Internetwork Operating System Software IOS (tm) 3000 Software (IGS-BPX-L), Version 10.0(8), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1994 by cisco Systems, Inc. Compiled Tue 14-Feb-95 21:06 by dougs Image text-base: 0x0301F9D4, data-base: 0x00001000
ROM: System Bootstrap, Version 4.14(9.1), SOFTWARE
R2-2501 uptime is 57 minutes System restarted by reload System image file is "igs-bpx-l.100-8", booted via flash
cisco 2500 (68030) processor (revision D) with 4092K/2048K bytes of memory. Processor board serial number 01741850 X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Bridging software. SuperLAT software (copyright 1990 by Meridian Technology Corp). Authorized for Enterprise software set. (0x0)
1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 32K bytes of non-volatile configuration memory.8192K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102
HELP!