[QOS] minimal hardware and IOS requirement for QOS

Feb 04, 2007 2 Replies
D
[QOS] minimal hardware and IOS requirement for QOS open original image

Hi all, I have 2 dozen of router to set up for QOS. I plan to upgrade all to at least C805, (there is some old 1600). there would be just a few users behind each leased line (in average of



128kbits) I would like to know if 8M byte of ram is enought ? I beg IOS 12.1 is enought, but I would like to know what minimal IOS version is required for QOS.


thanks for your advices and feedback.


-- dominix



Vote
Twitter Facebook LinkedIn
W

You may wish to investigate the Cisco Feature Navigator.

The Cisco Feature Navigator allows you to quickly find the right Cisco IOS and CatOS software release for the features you want to run on your network.

formatting link
Sincerely,

Brad Reese

formatting link

Vote
Twitter Facebook LinkedIn
D

thanks Brad, I didn't remerber of this "feature select" thing. throught I did use this page for comparing IOS :)

-- dominix

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required