NPE-G2 CPU Accounting

Can anyone offer any input on the CPU accounting for the NPE-G2's? I have a customer with a 7200VXR/NPE-G2 configuration that is experiencing an 85% utilization rate. I've heard that there are some issues with how CPU reporting is done on the NPE-G2's that may be confusing. Any advise/input would help. Thanks.

Reply to
braydonsdad
Loading thread data ...

Braydonsdad,

Pretty vague description. Can you elaborate?

What IOS? What process are high running high?

Reply to
Eric Hurd

Is your customer running IOS lower than 12.4(15)T ?

If so then consider upgrading to 12.4(15)T6

Reply to
Merv

Be *VERY* careful with this train...if you run multicast and try to re-mark packets in an MQC policy, you'll experience multicast traffic starvation when additional group joins occur after the initial join.

Merv wrote:

Reply to
fugettaboutit

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.