Interconnecting two pbx over CEoIP

Nov 30, 2006 1 Replies
H

Hi,



I have two PBX and CEoIP between them. PBX2 cannot get a clock from the PBX1.



Configuration:



PBX1 -E1- R1 -IP- R2 -E1- PBX2



R1: controller E1 1/0 cem-group 0 timeslots 1-31



cem 1/0/0 xconnect 10.65.152.2 0 encapsulation udp local ip addr 10.65.141.2 local udp port 15901 remote udp port 15902


R2: controller E1 1/0 cem-group 0 timeslots 1-31 clock source adaptive 0



cem 1/0/0 xconnect 10.65.141.2 0 encapsulation udp local ip addr 10.65.152.2 local udp port 15902 remote udp port 15901


Please help!!



Tnx



Vlaho


Vote
Twitter Facebook LinkedIn
M

try add "clock source line" here try remove the timeslot entries

Why do you use diffenrent UDP ports for the same connection ? What's the IOS version and platform ? Please post output of "show Cem summary" and "show cem 1/0/0" for both routers.

HTH Martin

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required