CISCO 3640 ISDN PRI setup for internet access

Hi , I have setup a cisco 3640 with ISDN PRI.Nothg looks working.I put on debugs but no debug messages comes on ....I make ISDN calls but nothg! What Am I doing wrong ? Pls help me ! Thanks

here is my configuration :

Current configuration : 3777 bytes ! version 12.2 service timestamps debug uptime service timestamps log datetime msec no service password-encryption

logging buffered 4096 debugging no logging console aaa new-model ! ! aaa authentication login default local aaa authentication enable default line aaa authentication ppp default local aaa accounting network default none aaa session-id common

username ialr password 0 dile username brwsr1 password 0 accss username browser password 0 accss username broser password 0 acces modem call-record terse modem country mica e1-default ip subnet-zero ! ! async-bootp dns-server 198.6.1.1 198.6.1.2 isdn switch-type primary-net5

controller E1 1/0 clock source free-running pri-group timeslots 1-31 description ISDN_0 ! controller E1 1/1 framing NO-CRC4 pri-group timeslots 1-31 description ISDN_1 ! ! interface Loopback0 ip address 10.0.30.254 255.255.255.0

! interface Serial1/0:15 ip unnumbered Loopback0 encapsulation ppp dialer rotary-group 1 dialer-group 1 isdn switch-type primary-net5 isdn incoming-voice voice peer default ip address pool ISDN-INTERNET no fair-queue no cdp enable ppp callback accept ppp multilink ! interface Serial1/1:15 no ip address isdn switch-type primary-net5 isdn T321 40000 isdn T310 4000 no cdp enable ! interface FastEthernet3/0 ip address 10.0.11.253 255.255.255.252 duplex auto speed 10 ! interface Serial3/0 no ip address shutdown clockrate 2000000 ! interface Group-Async1 ip unnumbered Loopback0 encapsulation ppp async dynamic routing async mode interactive peer default ip address pool ISDN-INTERNET ppp authentication ms-chap pap callin group-range 65 94 ! interface Dialer0 ip unnumbered Loopback0 encapsulation ppp no ip mroute-cache dialer in-band dialer-group 1 peer default ip address pool ISDN-INTERNET no fair-queue --More-- interface Dialer1 ip unnumbered Loopback0 encapsulation ppp no ip mroute-cache dialer in-band dialer-group 1 peer default ip address pool ISDN-INTERNET no fair-queue no cdp enable ppp multilink ! ip local pool ISDN-INTERNET 10.0.30.1 10.0.30.200

dialer-list 1 protocol ip permit ! line con 0 line 65 94 modem Dialin modem autoconfigure type mica rotary 1 transport input telnet autoselect during-login autoselect ppp stopbits 1 flowcontrol hardware line aux 0 line vty 0 4

Reply to
squid3570
Loading thread data ...

It looks like there is no encoding for the E1 circuit. Also, no framing for the circuit either. You'll have to contact the PRI provider for those settings. Try running the '#sh isdn status' to see if you are making a L2 and or L3 connection.

Reply to
Bantec

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.