I have a 837 and I was setting up the config file. I gave it a name and enabled the ssh 2 server. There was only a "login" (not login local) on line vty 0 4 with password cisco. It has never asked to me the username before configuring the ssh server and before exiting for timeout but it has not username configured. Which username have I to write on login? I tried level_15_access, level_15, admin but none of them worked.
Can anyone help me? I was managing it by remote...
Alex.
Hi Alex,
You may want to investigate Default Logins and Passwords for Networked Devices:
Brad Reese BradReese.Com=AE Cisco Resource Center Toll Free: 877-549-2680 International: 828-277-7272=20 Website:
Alex.
SSH requires authentication, which is why you will need to enter a username / password.
Configure a user using the "user" command under global config mode.
even if I try to connect via telnet? alex.
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.