CISCO PIX 501

Hi,

I have a CISCO PIX 501 that I need to reconfigure. The problem that I have is the last engineer left the device and did not provide the info of the current configuration (IP address, password, ect...)

That is a way to reset the PIX 501 to factory defaults setting with out login to the firewall?

Thank you,

Reply to
robson_xavier01
Loading thread data ...

In article , wrote: :I have a CISCO PIX 501 that I need to reconfigure. The problem that I :have is the last engineer left the device and did not provide the info :of the current configuration (IP address, password, ect...)

Search cisco.com for pix password recovery

Reply to
Walter Roberson

You may wish to investigate Password Recovery and AAA Configuration Recovery Procedure for the PIX:

formatting link
as well as Cisco PIX 500 Series Security Appliances Troubleshooting Guides:

formatting link
and finally Cisco PIX 500 Series Security Appliances Troubleshooting TechNotes:

formatting link
Hope this helps,

Brad Reese BradReese.Com Cisco Repair Service Experts

formatting link
Hendersonville Road, Suite 17 Asheville, North Carolina USA 28803 USA & Canada: 877-549-2680 International: 828-277-7272

Reply to
www.BradReese.Com

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.