1. Home
  2. Cisco Systems
  3. CISCO IOS Router DHCP

CISCO IOS Router DHCP

  1. I hav estarted DHCP debug command. This is outcome: Writing dhcp_router Feb 5 16:47:06.647: %DHCPD-3-WRITE_ERROR: DHCP could not write bindings to ftp://dhcp:dhcp@192.168.0.11/dhcp_router. Why do I recive this mesage? FTP is on and running!

  1. How to put in a pool a subnetwork 192.168.0.128 /25? I have tryed with command "network 192.168.0.128 /25" but then no computer in network recives IP address. If I put command "network 192.168.0.0 /24" then it starts giving IP address from 1. Must I put in the pool whole network (network 192.168.0.0 /24) and then exclude address from 1-127? I would like to do it with subnetworks.

Thanks!

Reply to
Tomislav Parč
Loading thread data ...

Hi,

Start the DHCP service by config# service dhcp ip dhcp pool 1 network 192.168.0.128 255.255.255.252

ps. What is the status of your ethernet interface ?

regards, Glenn

Tomislav Parc> 1. I hav estarted DHCP debug command. This is outcome:

bindings

Reply to
Gee

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.