Not so strong into the cisco world, but I have tried to build this config "in my head" - I would like you to comment on it. I want to have the 828 to work as a G.SHDSL modem and a bridge. Passing all IP's through the router unchanged. Is this the right config for this:
version 12.2 no service pad service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname SDdls ! enable secret 5 xxx ! username CRWS_Srini privilege 15 password xxx username admin password 7 xxx username SDdls password 0 xxx ip subnet-zero ! bridge irb ! ! interface Loopback161 no ip address ! interface Ethernet0 no ip address hold-queue 100 out bridge-group 1 ! interface ATM0 no ip address no atm ilmi-keepalive pvc bridging1 0/101 encapsulation aal5snap ! dsl equipment-type CPE dsl operating-mode GSHDSL symmetric annex B dsl linerate AUTO bridge-group 1 ! interface BVI1 no ip address bridge-group 1 ! ip classless ip http server ! ! bridge 1 protocol ieee bridge 1 route ip ! line con 0 exec-timeout 120 0 stopbits 1 line vty 0 4 access-class 23 in exec-timeout 120 0 password xxx login local length 0 ! scheduler max-task-time 5000 end
Thank you in advance.
Regards, Lars.