Hi there. I have a 3640 running enterprise plus 12.4(8) that won't see a WIC-1ADSL card.
The WIC card is inserted into a NM 2E 2W Network Module, along with a WIC-1T1DSU. I have swapped WIC slots, and tried booting just with the ADSL WIC, no luck.
The card is a known good, since it lights up to OK in a 2611.
Am I missing something here?
Any and all help is appreciated.
Thanks
Check
Wow found my answer. The Network Module does not support the WIC-1ADSL. Wierd.
Note: For the Cisco 3600, ADSL is not supported on WIC NM-1E1R2W, NM-1E2W, or NM-2E2W
Oh well, off to ebay I go.
You can use a NM-2FE2W module. It works for me:
router#show diag Slot 0: NM-2FE2W Port adapter, 2 ports Port adapter is analyzed Port adapter insertion time unknown EEPROM contents at hardware discovery: Hardware Revision : 1.0 Top Assy. Part Number : 800-04797-01 Board Revision : G0 Deviation Number : 0-0 Fab Version : 05 PCB Serial Number : JAD0626CFJD RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Product (FRU) Number : NM-2FE2W= EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 00 D8 41 01 00 C0 46 03 20 00 12 BD 01 0x10: 42 47 30 80 00 00 00 00 02 05 C1 8B 4A 41 44 30 0x20: 36 32 36 43 46 4A 44 03 00 81 00 00 00 00 04 00 0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
WIC Slot 0: DSL SAR (ADSL)
Hardware Revision : 2.2 Part Number : 73-4771-07 Board Revision : A0 Deviation Number : 0-0 Fab Version : 05 PCB Serial Number : JAB05370J1A RMA Test History : 00 RMA Number : 0-0-0-0 RMA History : 00 Product (FRU) Number : PA-1C-P= EEPROM format version 4 EEPROM contents (hex): 0x00: 04 FF 40 00 2E 41 02 02 82 49 12 A3 07 42 41 30 0x10: 80 00 00 00 00 02 05 C1 8B 4A 41 42 30 35 33 37 0x20: 30 4A 31 41 03 00 81 00 00 00 00 04 00 FF FF FF 0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Not surprising at all. The NM-xE cards are old, proabably EOL, while ADSL WICs are pretty new.
These are the NM's that support the WIC-1ADSL:
NM-2W NM-1FE2W NM-1FE2W-V2 NM-2FE2W NM-2FE2W-V2 NM-1FE1R2W NM-1FE1R2W-V2
I have:
1 x NM-1FE2W USED @ $450 4 x NM-1FE1R2W USED $425/each [equivalent use as NM- 1FE2W] 20 x NM-2FE2W USED @ $700/eachALL GUARANTEED to be REAL, CISCO ORIGINAL. NO counterfeits! Let me know if you need anything
---------------------------------------------- Posted with NewsLeecher v2.0 Final * Binary Usenet Leeching Made Easy *
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.