1. Home
  2. Wireless Networking
  3. hi. question about linksys wireless

hi. question about linksys wireless

I wan't to disable the wireless On my linksys 80211b and g router. And anyone tell me the code, to get in the network? Thanks.

Reply to
res0i39c
Loading thread data ...

Go to the internet exployer and type in the IP that is in the manual.

Reply to
Rich

"res0i39c" hath wroth:

It's usually on the "wireless" page in the web based setup. Not all wireless routers have a wireless disable feature.

If you want more specifics, kindly disclose the model number, hardware version, and firmware version.

Reply to
Jeff Liebermann

192.168.1.1

user name: admin password: admin

If they don't work. Then you will have to push the reset button on the back of the unit.

*Warning* If you push the button to do a reset, all settings that were stored will be reset to factory.
Reply to
kevin weaver

username - this is left blank on Linksys

Reply to
__spc__

Not on mine. I had to enter admin to get in. They may have changed it. Mine was old.

Reply to
kevin weaver

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.