1. Home
  2. Virtual Private Networks
  3. Linksys WRV54G and Sentinel VPN Problems

Linksys WRV54G and Sentinel VPN Problems

Hi. I'm having trouble establishing a VPN tunnel from my PC (LAN

192.168.2.0/255.255.255) to my office WRV54G router (LAN 192.168.5.0/255.255.255.0). I've got my home router with passthrough enabled and port 500 forwarded. I believe this end is fine as I can establish tunnels to other linksys routers voer the internet. However, SSH Sentinel tells me that the router doesn respond to the IKE request.

Has any successfully done this? I've been able to configure a BEFVP41 for this int he past without too much trouble, but this router is a pain. Any suggestions would be a huge help. Thanks,

--Ryan

Reply to
ryanscheller
Loading thread data ...

Hi Ryan,

Check this site out. The settings for Greenbow should be similiar for SSH Sentinel for Phase 1 and Phase 2 parameters. Ensure you have the latest firmware release for the router (this router doesn't have NAT T)

formatting link
download the guide for the Linksys

Cheers

Reply to
Brett Jarcevic

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.