VPN between Astaro 6.0 and Sonicwall 4060

We have the following configuration:

Internet-Astaro-Cisco_Router-Sonicwall4060-LAN

I want to configure VPN connection as follows:

  1. User connects to the Astaro using their vpn client.
  2. Site-Site VPN between Astaro and Sonicwall which connects the user to the internal network.

Has anyone tried this configuration? I am having lots of trouble making the site-site connection between the Astaro and the Sonicwall. Does anyone have any experience with this configuration? I get the below error while configuring the site-site:

000 000 "S_Sonicwall__200_0": 192.168.210.1...192.168.200.1===255.255.255.0/24; unrouted; eroute owner: #0 000 "S_Sonicwall__200_0": srcip=unset; dstip=unset 000 "S_Sonicwall__200_0": ike_life: 28800s; ipsec_life: 28800s; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0 000 "S_Sonicwall__200_0": policy: PSK+ENCRYPT+TUNNEL+UP; prio: 32,24; interface: eth0; 000 "S_Sonicwall__200_0": dpd: (null); delay:30; timeout:120; 000 "S_Sonicwall__200_0": newest ISAKMP SA: #0; newest IPsec SA: #0; 000 "S_Sonicwall__200_0": IKE algorithms wanted: 5_000-1-2, flags=-strict 000 "S_Sonicwall__200_0": IKE algorithms found: 5_192-1_128-2, 000 "S_Sonicwall__200_0": ESP algorithms wanted: 3_000-1, flags=-strict 000 "S_Sonicwall__200_0": ESP algorithms loaded: 3_000-1, flags=-strict 000 000 #7: "S_Sonicwall__200_0":500 STATE_MAIN_R1 (sent MR1, expecting MI2); EVENT_RETRANSMIT in 12s; nodpd 000 #10: "S_Sonicwall__200_0":500 STATE_MAIN_I1 (sent MI1, expecting MR1); EVENT_RETRANSMIT in 39s; nodpd 000 #10: pending Phase 2 for "S_Sonicwall__200_0" replacing #0 000 #8: "S_Sonicwall__200_0":500 STATE_MAIN_R1 (sent MR1, expecting MI2); EVENT_RETRANSMIT in 21s; nodpd 000 #6: "S_Sonicwall__200_0":500 STATE_MAIN_R1 (sent MR1, expecting MI2); EVENT_RETRANSMIT in 6s; nodpd 000 #5: "S_Sonicwall__200_0":500 STATE_MAIN_R1 (sent MR1, expecting MI2); EVENT_RETRANSMIT in 1s; nodpd 000 #9: "S_Sonicwall__200_0":500 STATE_MAIN_R1 (sent MR1, expecting MI2); EVENT_RETRANSMIT in 39s; nodpd 000
Reply to
Kunal Keshav
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.