Hi !
We are trying to get access to FastRAD through Cisco AUX port by scheme below :
PC(with Cisco DialOut Utility or Tactical Software COM/IP Redirector)
----->(ip)------->Cisco,AUXport---(rj452db9)----->FastRAD. With Cisco DialOut Utility we emulating com-port on PC.
So , where is signal on cisco AUX and FastRAD: Cisco AUX
1 RTS 2 DTR 3 TxD 4 GND 5 GND 6 RxD 7 DSR 8 CTSFastRAD
1 DCD (from FastRAD) 2 RxD (from FastRAD) 3 TxD (to FastRAD) 4 DTR (to FastRAD) 5 GND - 6 DSR (from FastRAD) 7 RTS (to FastRAD) 8 CTS (from FastRAD) 9 RI (from FastRAD)How we need to interconnect them ? Is this scheme possible ?