23 discussions on Cabling-Design.com Forums about the Cisco WIC-1T: what owners asked, what went wrong, and what fixed it.
I have a 1720 with 32/8mb running IOS I want to use a WIC-1ENET card, but I keep getting the following error!00:00:04: %PQUICC-1-UNKNOWN_WIC: PQUICC(0), WIC card has an unknown ID of 0x39Cisco Internetwork Operating System Software IOS (tm)...
I'm a little confused as to what the options are for connecting T1s toCisco routers, as I come from a Commonwealth country (where we use E1sinstead).Where my questions lie is the role that CSU/DSUs play in connecting T1circuits to routers...
Hi I bought one WIC-1T and once installed it detects but it wontwork, the light is a constant orange amber, Ive tested with ISP allsorts, encapsulations etc, but it wouldnt work, I tested on a 2811 andin a 2621 and detects but the light...
Thanks in advance.Is it possible to run a back to back serial connection between a 2501and 2620?If so, what cabling would I require?If not, is there an alternative configuration for the topology below,or should I pickup another...
Hello:I am new to working with Cisco products and I am trying to setup my 1760 router to make a dialup connection to my ISP with the WIC-1T serial card and an external V.92 modem. I realize it's an involved process and I am trying to read...
Folks:I would like to sell my CCIE Kit. I am actually getting out of the IT field and launching a brand new career in the Stock Market.Some of the equipment was bought new and some used. The 25xx routers were bought used, the others items...