13 discussions on Cabling-Design.com Forums about the Cisco PIX515E: what owners asked, what went wrong, and what fixed it.
The PIX 515E with DMZ has been good to us but it is getting a bit long in the tooth. We do not need the DMZ and we do not need failover. Just need to do Cisco client VPN and Point to point VPN. Inside clients number less than 100, and we...
I purchased a used Cisco Pix 515e last year. It is currently runningversion 6.3 and I need to upgrade the software due to new VoIP phoneswe just had installed and also to have better performance on our VPNclient. Does anyone have any...
Cisco PIX515E which I need to configure to allow traffic to a newserver on an internal IP address using ports 80, 25 and 21... I have adedicated external IP address and a dedicated Internal IP address forthe server... the PIX firewall...
Hello!We have a PIX515E device.It is currently running:Cisco PIX Firewall Version 6.3(3)Cisco PIX Device Manager Version 3.0(1)I have the VPN Client CD which came with the device. It contains CiscoVPN Client 3.6.0 and 4.0.1 for Windows. I...
Going to sell a PIX by second hand and with the following features- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Cisco PIX Firewall Version 6.3(5)Cisco PIX Device Manager Version 3.0(4)[CUT]Hardware:...
just an interesting problem with a pix515E-UR:running 6.3(5)This pix have only 2 ethernet interfaces; i have connected theethernet0(outside) via a cross cable to the 1760 installed by my connectivity provider; this have public IPaddresses....