1. Home
  2. Cisco Systems
  3. Adding additional routes to a VPN client (PIX515E and Cisco client)

Adding additional routes to a VPN client (PIX515E and Cisco client)

Lets say I have a local network at 10.20.2.0/24 and a dmz at

192.168.216.0/24 on a PIX515E. VPN works fine using the cisco vpn client to anything in 10.20.2.0, however I can't reach anything on 192.168.216.0 presumably because its not being routed through the VPN tunnel. The VPN client only shows the route to 10.20.2.0 in the statistics page.

Is there a command on the PIX when setting up the VPN tunnel that tells the VPN client to also add a route to 192.168.216.0?

Thanks.

Reply to
jlamanna
Loading thread data ...

Reply to
jlamanna

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.