Cisco PIX515E and RDP

My nickname used to be jsandlin0803, but it stopped working for some reason.

Anyways, I have a Cisco PIX 515e, and have it set up for VPN. The users are autheticated by the PIX's internal database of users, and have access to one of my lans. I have Split tunneling enabled, so that users can access their own LAN. I think that i have it set up a little wrong.

Users can see their printer when the connect (a networked printer using LPT3 and Net Use command), but they cannot print. I go the the status of the vpn client, and i have a static route of 192.168.0.0

255.255.255.0, and that is it. I dont think that they are on that particular network there. They may be on a 192.168.1.0 255.255.255.0 network. Would this be the problem? If so, could i change the split tunnel properties to be 192.168.0.0 255.255.0.0 and everyone will work?

Please let me know ASAP.

Thanks in advance, Jason

Reply to
jasonsandlin04
Loading thread data ...

Does anybody have any comments on this?

Reply to
jasonsandlin04

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.