11 discussions on Cabling-Design.com Forums about the Cisco 2924XL: what owners asked, what went wrong, and what fixed it.
Hello,I have inherited a cisco 2924xl which died on someone. I'm hoping to get it working but fear the worst.The unit fails on power up during the POST tests. Amber lights come on for the first four LEDs in the unit, which indicate...
Lighning hit a 12kv line very near. (about 30-40m away). This was downstream from the transformer that feeds me electricity and there was a fuse between the point of impact and our transformer.A mac with long ethernet cable had its ethernet...
Lets try this again; I have a network connecting three buildings using Cisco2924XL-en switches. The switches are used and were just bought. I'm gettingthe following error. I've never used VLAN's before and don't plan on usingthem in this...
Hello,I am a newbie have inherited a Catalyst 2900. It seems to have twofiber ports on it; ports 23 & 24. Is there a way to determine ifthese are 1GB ports? Is there anything slower? I do a 'sh ru' and itlists these ports as...
We have a 100-BASE-T segment from a Cisco 2924XL switch that runsabout 240 feet to a small D-Link 5-port 10/100 switch. From there, there'sa line running between 50 and 75 feet. Until recently, that was connected toa PC, and everything...
Hello,I've been asked to purchase 4 Cisco 24 port switches. The vendor tellsme that he does not have the 2950 XL in stock but does have the 2950'sin stock. What is the difference between these 2 switches?Tacobell