Hi everyone -
I have an Applied Digital Ocelot and a couple other modules that I would like to connect to each other wirelessly. I looked on the web for wireless Rs485 solutions and all I found was cellular modems, the cheapest of which was about $300. Is a cell modem the only available solution for this?
Thanks for any advice anyone can offer
Matt
Thanks, I'll take a look for them.
Matt
Matt,
We have a module called the AP900. It communicates on a 900mHz signal so you don't have to run cables. Give me a call at 417-338-5101 if you would like to discuss this further.
Kev> Hi everyone -
Hi Kevin -
I was looking at your web site and I didn't see any information on them there. Rahter than making a long distance phone call is there a web page where you have specs and prices?
Thanks
Matt
We don't have them on the web site yet. E-Mail me ( snipped-for-privacy@apdig.com) and I'll e-mail you the specs and prices.
Kevin Barrett ADI Tech Support
Oops! My e-mail address is snipped-for-privacy@appdig.com.
Kevin Barrett ADI Tech Support
Have something to add? Share your thoughts — no account required.
Ask the community — no account required