I have a Lynx-R Wireless Keypad and would like to control via X10 two lights at two different locations in my home. Can someone recommend an X10 device to use with this keypad?
Lynx-R and X-10 Options
Aug 26, 2006
3 Replies
You will need the following:
- Ademco 1332X10 Transformer
- X-10 Phase Coupler/Blocker
- up to eight X-10 switches/relays
Frank can I use two of these devices instead of the Phase Coupler/Blocker:
formatting link
Or would I have to use this device:
formatting link
Here's another 220v Dryer Coupler, which I don't have.
formatting link
Please note my dryer is Gas and it plugs into a 110 outlet using a three prong plug. Therefore, I'm not sure how the secound unit would work.
Both of those units are for 220 volt dryer outlets (3 prong is old style, 4 prong is newer version). Many homes have a 220 volt outlet by the dryer even if they have gas so the homeowner can use either a gas or electric model. However, many with gas do not. There are wire-in versions of those devices for those that don't have the dryer outlet.
Jack wrote:
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required