1. Home
  2. General Home Automation
  3. gate switch

gate switch

I am looking for a switch that I can use to alert me through x-10 when it is opened. I have seen switches that make a loud sound, but I would like for it to trip an x10 light. I have tried to use an eagle eye but it picks up too much motion, like a rabbit running through the back yard. Any ideas? Thanks Jaxn

Reply to
JD
Loading thread data ...

Hi Jaxn, What you need is a dry contact transmitter as in

formatting link
You just run a cable from the contacts to a remote switch that you need to monitor. The transmitter will then transmit to the X10 unit of your choice (a lamp module etc.)

Alternately, you could hack any of the RF transmitters and solder a wire across the appropriate switch to transmit the light-on command to an RF transciever.

Regards,

Anand Dhuru

Reply to
Anand

Here is another one

formatting link

Reply to
hmjunk31415

How about your quanity? It is larger. Do you want to develop this product in China? You know we have decora switches and export U.S.A and Canada.

Thanks

My email is snipped-for-privacy@yahoo.com.cn

Reply to
cnvendor

Are you working electric industy? If possible, pls visit

formatting link

Reply to
cnvendor

Are you working electric industy? If possible, pls visit

formatting link

Reply to
cnvendor

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.