Can anyone post a sampe config of Cisco IOS Easy VPN Server.THanks.
here is the existing setup...i tried using the SDM wizard config but it replaced everything on the running-config.
PC/VPN client-------Internet------T1DSL/Stat. Pub IP/NAT-----IOS FW/VPN/NAT.
from DSL modem to Cisco 3825 IOS FW/VPN is private ip with NAT and from cisco 3825 to LAN users is also NATed/FW.
I knew i can do a vpn setup from cisco 3825 if it has a static public ip address but it uses a private ip address from the DSL/T1 which is also running NAT and the DSL/T1 modem has the one with static public ip address.
Technically, is this possible? i will need to setup a vpn connection from home pc/vpn client to access the cisco 3825 network/servers.
your input is greatly appreciated :)
Thanks, rocky