Cisco Systems

Loopback, unnumbered and two ifs.

We're currently running a configuration that uses an IP address on the FastEthernet port, ip unnumbered on the Serial p...

4 comments posted 17yrs

posted by spam.sc

4 comments posted 17yrs posted by spam.sc

Eigrp&ISDN

Hi, Can you please tell me the logic behind unplugging the Fast Ethenet cable when the EIGRP is down to fire up the ISDN...

1 comments posted 17yrs

posted by nsphaneendra

1 comments posted 17yrs posted by nsphaneendra

missing "rtr" command for Tracking IP SLA

We're running IOS 12.4(15)T on a 2811 and trying to use Reliable Static Routing Backup as per http://www.cisco.com/en/U...

2 comments posted 17yrs

posted by rsxh

2 comments posted 17yrs posted by rsxh

WPA2 Suuport on ISR 871W?

Hi there, can anybody verify if WPA2 (AES) is supported on the ISR 871W? According ciscos datasheets they support WPA2....

1 comments posted 17yrs

posted by aheinzelmann

1 comments posted 17yrs posted by aheinzelmann

Using RIP v2 between two routers

Hello. I am having difficulty getting RIP to work between 2 routers and I was hoping one of you could help. Here is my...

3 comments posted 17yrs

posted by guardian911

3 comments posted 17yrs posted by guardian911

Help with Cisco 837 router to connect to the Internet via ADSL?

I've just got a Cisco 837 ADSL router which I'm hoping to use to connect to the Internet via BT broadband in the UK (PP...

3 comments posted 17yrs

posted by SpamSpamSpam

3 comments posted 17yrs posted by SpamSpamSpam

Equipment

CISCO NETFLOW FEATURE CARD II WS-F5531 3COM SUPERSTACK 8 PORTS 3COM SUPERSTACK 24 PORTS

0 comments posted 17yrs

posted by dave.candlesd4

0 comments posted 17yrs posted by dave.candlesd4

standard EN 50174-3

Hello, where can I fin standard EN 50174-3 (EU standard for generic cabling), thx

1 comments posted 17yrs

posted by skondro

1 comments posted 17yrs posted by skondro

VPN client with sertificate or SSL VPN

I have to implement company wide remote access using Cisco ASA. I'm wondering what direction to take: Full Cisco VPN cl...

0 comments posted 17yrs

posted by wilson_jr5

0 comments posted 17yrs posted by wilson_jr5

nat and static routing, what to route

when i define a outside static nat entry, what do i put in as static route ? Do i put in the natted address, or the rea...

1 comments posted 17yrs

posted by alefveld

1 comments posted 17yrs posted by alefveld

native vlan

Can anyone maybe explain to me the concept of native vlans ? In all the books i've read it's explained horribly incomple...

4 comments posted 17yrs

posted by alefveld

4 comments posted 17yrs posted by alefveld

switches, spanning tree question regarding designated ports and switches

Hi, As far as i understand STP, every switch has one RP with the lowest path cost back to the root switch. If a segment...

0 comments posted 17yrs

posted by alefveld

0 comments posted 17yrs posted by alefveld

terminal length in 12.4T?

How doi we set terminal length in 12.4T ? terminal length 0 doesnt seem to work

1 comments posted 17yrs

posted by taranfx

1 comments posted 17yrs posted by taranfx

where do the LAN smtp traffic come from?

I have an access-list where I block all emails (smtp) sent from LAN computers. access-list acl_out extended deny tcp an...

6 comments posted 17yrs

posted by Toppy

6 comments posted 17yrs posted by Toppy

Cisco Wireless 3GHWIC + Telstra

Am looking at a solution for a client who is currently utilising Cisco Wireless 3GHWIC cards. Has there been a firmware...

1 comments posted 17yrs

posted by damianpfreeman

1 comments posted 17yrs posted by damianpfreeman