Cisco Systems

mpls info not available via SNMP

Hi, I have been told by a manager that mpls info is not normally available via SNMP and that telnet/ssh should be used....

3 comments posted 17yrs

posted by sydneypuente

3 comments posted 17yrs posted by sydneypuente

Configure logging and audit on routers

Hello everyone, I'm having some troubles finding a guide or document on how to enable audit in routers. I've read the C...

1 comments posted 17yrs

posted by sagarboy

1 comments posted 17yrs posted by sagarboy

ASA 2x Lan2Lan

Hi I have to connect LAN1 and LAN3 LAN1--ASA1---ASA2---ASA3--LAN3 i read this: https://www.cisco.com/en/US/products/ps6...

0 comments posted 17yrs

posted by ted

0 comments posted 17yrs posted by ted

pop mail attacments not passing through

Hi guys, I cannot get pop mail with attachment s through a pix, it will allow pop without atachment though. Any ideas w...

0 comments posted 17yrs

posted by andy.mas

0 comments posted 17yrs posted by andy.mas

WPA-PSK and an HP rw6815/6828: cannot connect!!

I have a Cisco 877W configured for a WPA-PSK wifi with tkip encryption. I have also a PPC HP Ipaq rw6815 or rw6828 that...

3 comments posted 17yrs

posted by massimo.maccalli

3 comments posted 17yrs posted by massimo.maccalli

Cisco Switches vs HP ProCurve Switches

We're looking at replacing our Cisco edge switches at our company. Currently we're looking at Cisco or HP switches righ...

5 comments posted 17yrs

posted by gbiettler

5 comments posted 17yrs posted by gbiettler

See trafic on a cisco 1700 eth0 interface ?

Hi can i see this information on a cisco 1721 : - Show all mac with in/out octets used - shall all tcp trafic on a inter...

3 comments posted 17yrs

posted by mag

3 comments posted 17yrs posted by mag

Enterprise vs. IPServices

Hi, right now we have here at our headquarter two Cisco 1812 in place for DMVPN. one is active and the other one is col...

2 comments posted 17yrs

posted by lassmichinruhe

2 comments posted 17yrs posted by lassmichinruhe

Cisco ASA 5510 and Apple iPhone

I'm trying a couple of weeks to get an IPSEC VPN connection from an iPhone with the new Apple IPSEC Client to a Cisco A...

2 comments posted 17yrs

posted by w.neu

2 comments posted 17yrs posted by w.neu

invalid boot magic number

Hi, when i was trying to upgrade the 1750 router with 12.3 IOS, in the middle of the upgrade it' was failed. after rebo...

1 comments posted 17yrs

posted by kjsubbu

1 comments posted 17yrs posted by kjsubbu

Connection problem between the ports

Hi all I don't have any Cisco devices but I tho that this problem might be similar to all ethernet switches. I have a P...

1 comments posted 17yrs

posted by saku.loukonen

1 comments posted 17yrs posted by saku.loukonen

Log full of Auth Failed.. how to block it?

Hi, I have the log full of authenticatin failed to wifi access point of my 877w by a unique mac address unknown by me....

2 comments posted 17yrs

posted by no

2 comments posted 17yrs posted by no

NAT Puzzler - help please

Please reference the ASCII drawing below. Hopefully it will come through OK. If not, a font change to Courier should wo...

2 comments posted 17yrs

posted by ve7eje

2 comments posted 17yrs posted by ve7eje

Cisco 871 - Lost Site-Site VPN Config

I have an ASA5505 in our main office that is talking to some 871 Routers in remote offices. I have a working config for...

3 comments posted 17yrs

posted by timpar

3 comments posted 17yrs posted by timpar

Statefull inspection

Hi All, I have a Cisco 3750 with two VLANs defined on a single port (one for data and one for voice): interface Gigabit...

2 comments posted 17yrs

posted by aleu

2 comments posted 17yrs posted by aleu