Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Repeater Bridge Link

I have a multi-point scenario with five Cisco 1300 bridges involved. Only one of the non-root bridges can see the root...
0 comments posted 20yrs
posted by z400d3ZZZ
0 comments posted 20yrs posted by z400d3ZZZ

vlan and vpn config question

Hi All, I currently have a pix 515e with vpn groups. we are seeing rapid growth in the vpn use and i need to be able to...
3 comments posted 20yrs
posted by rhltechie
3 comments posted 20yrs posted by rhltechie

IPSec tunnels + NAT overload + NAT static

I have a setup with 1*1711 and 3*831. There is an IPSec tunnel between each of the 831 (remote sites) and the 1711 (mai...
1 comments posted 20yrs
posted by alpertech
1 comments posted 20yrs posted by alpertech

cbac, nat & dialer issues

Hi, I'm facing a problem with CBAC on a 12.2-32 1601R : When I try to telnet the https port of a host on the internet,...
1 comments posted 20yrs
posted by emss
1 comments posted 20yrs posted by emss

Support for ISAKMP/IKE over IPv6

Hello, I'm trying to learn if ISAKMP/IKE is supported over IPv6 either in a native IPv6 environment or tunnelled over I...
0 comments posted 20yrs
posted by jc1234
0 comments posted 20yrs posted by jc1234

Help with PIX515E config

hi all, I've been unlucky with my previous posts in this newsgroup, this time I hope to receive answers from you expert...
2 comments posted 20yrs
posted by mfoolb
2 comments posted 20yrs posted by mfoolb

BCMSN?

Hi, I'm planning to make a LAB for this to prepare myself for the exam. what switch series should I'll be using? 3550?...
1 comments posted 20yrs
posted by walvarez
1 comments posted 20yrs posted by walvarez

Creating a trunk between two 2950s

This should be an easy "red-meat" question for this group. I was asked to set up a trunk between two 2950 switches. Whe...
4 comments posted 20yrs
posted by mtdinsmore
4 comments posted 20yrs posted by mtdinsmore

restrict from designated MAC address

We are using CSS 11501. Can I restrict IP packet with designate MAC address? Thank you.
0 comments posted 20yrs
posted by fangyong.F
0 comments posted 20yrs posted by fangyong.F

Getting a VPN to work through a Cisco firewall

Hello all, I've been configuring Cisco devices in a relatively simple fashions for years now. However, we've got a cust...
1 comments posted 20yrs
posted by NOSPAM-kunkel
1 comments posted 20yrs posted by NOSPAM-kunkel

ip local pool question

Hi, I have two PIX firewalls: a 501 and a 515 that I am trying to issue the following command: ip local pool PoolName 1...
6 comments posted 20yrs
posted by google
6 comments posted 20yrs posted by google

Cisco MTBF

As part of the construction of a new depot, a network is being designed and installed by a sub-contractor to the builde...
5 comments posted 20yrs
posted by Ian
5 comments posted 20yrs posted by Ian

Older ACS version on Windows Server 2003

We've been running an older version of Cisco ACS (2.6x) on windows server 2000 for several years now. It uses active di...
1 comments posted 20yrs
posted by butlercellars
1 comments posted 20yrs posted by butlercellars

MARS

We are contemplating installation of a MARS system and would appreciate comments from anyone who has participated in on...
1 comments posted 20yrs
posted by sgione
1 comments posted 20yrs posted by sgione

Static PAT overrides Dynamic Pat - Pix 515e

A strange thing happened when we upgraded our PIX. We were using PIX Version 6.3(1) and upgraded to: PIX Version 7.0(2)...
4 comments posted 20yrs
posted by matt
4 comments posted 20yrs posted by matt